High quality, easy to use and comfy to wear, Jayley's reusable and sustainable fashion face masks will help you keep yourself styled and others protected.

It is very important to know how to wear and how to remove your mask for your own and other people safety.

Here are a few preliminary steps to follow:

1. Wash your hands with soap and water for at least 20 seconds. Dry your hands with a clean paper towel and throw the paper towel away.
2. Check the mask for any defects such as a tear or missing tie or ear loop. Throw away any that are defective.
3. Make sure the exterior (usually coloured or printed) side of the mask is facing out, away from your face.
4. Place the mask on your face with the coloured side facing out and the stiff, bendable edge at the top by your nose.
5. Put each ear loop around each ear.
6. Once the mask is in place, use your index finger and thumb to pinch the bendable top edge of the mask around the bridge of your nose.
7. Make sure the mask is completely secure. Make sure it covers your nose and mouth so that the bottom edge is under your chin.
8. Wash your hands.

1. Wash your hands before removing the mask.
2. Do not touch the inside of the mask (the part over nose and mouth). It may be contaminated from your breathing, coughing or sneezing.
3. Remove the ear loops
4. Wash your hands.

Please Note: After using our Jayley reusable cloth mask, at the end of the day, take the mask off by the ear loops (not touching the front) and place it in a pillowcase Wash it in the washing machine with hot water and completely dry on medium or high heat.​ We recommend 50 - 60 degrees.